Product details
Specifications
Recommend
Service & Policy

PRODUCT IDENTITY

Bently Nevada · 3300 XL 8 mm

330103-02-08-10-02-CN

Metric Proximity Probe

Product Overview

Bently Nevada 330103-02-08-10-02-CN is a 3300 XL 8 mm eddy-current proximity probe for non-contact measurement of shaft vibration and position on rotating machinery. This metric probe uses an M10 x 1 threaded case without armor, a 20 mm unthreaded length, an 80 mm overall case length, a 1.0 m standard cable and a miniature ClickLoc coaxial connector. The final CN suffix must be confirmed from the unit label and project approval requirement before ordering.

Purchase Snapshot

Brand: Bently Nevada

Model: 330103-02-08-10-02-CN

Series: 3300 XL 8 mm

Type: Metric proximity probe

Condition: New Original

Stock: In Stock · 2 units

Warranty: One year

Typical Applications

Radial shaft vibration measurement
Axial or thrust position monitoring
Keyphasor reference and speed measurement
Fluid-film bearing machinery protection

Model Identification

Order by the complete code 330103-02-08-10-02-CN. Code breakdown for Bently Nevada 330103-02-08-10-02-CN: 330103 = 3300 XL metric proximity-probe family; first 02 = 20 mm unthreaded length; second 08 = 80 mm case length; 10 = 1.0 m total probe/cable length; second 02 = miniature ClickLoc coaxial connector with standard cable; CN = approval/configuration suffix to verify from the nameplate and project records. Confirm the Bently Nevada 330103-02-08-10-02-CN label, connector and case geometry from the installed item.

Compatibility Check

Use with a compatible 3300 XL 8 mm extension cable and Proximitor Sensor whose combined probe-and-extension-cable length matches the selected system length. Confirm the monitored target material, existing gap setup, cable route, connector style and monitor input before replacement. Similar 3300 XL probes are not interchangeable solely because their probe tips look alike.

Installation and Replacement Notes

De-energize the monitoring channel before replacement. Preserve the documented probe gap, M10 x 1 mounting position, locknut setting, cable routing and connector protection. Do not sharply bend, shorten or splice the integral probe cable. After installation, verify gap voltage, channel OK status, polarity and vibration response against the site procedure before returning the machine to service.

Request Price & Availability

Buyer FAQ

Does every part of Bently Nevada 330103-02-08-10-02-CN need to match?

Yes. Confirm the complete Bently Nevada 330103-02-08-10-02-CN code, including both mechanical-length fields, total cable length, connector option and CN suffix. A shortened 330103 reference is insufficient for an exact replacement.

Which extension cable and Proximitor Sensor should be used with Bently Nevada 330103-02-08-10-02-CN?

Select compatible 3300 XL 8 mm components for Bently Nevada 330103-02-08-10-02-CN so the probe length plus extension-cable length equals the Proximitor Sensor system length. Confirm the installed system length and target material before ordering.

Can actual label and connector photos for Bently Nevada 330103-02-08-10-02-CN be supplied?

Yes. Request current-stock photographs for Bently Nevada 330103-02-08-10-02-CN showing the complete nameplate, probe tip, M10 thread, cable, ClickLoc connector and visible suffix before approving the quotation.

How are stock and testing for Bently Nevada 330103-02-08-10-02-CN confirmed?

The quotation can state the physical-stock check, visual inspection and the available probe, cable-continuity or system-response checks for Bently Nevada 330103-02-08-10-02-CN. Required acceptance criteria should be agreed in writing before shipment.

02 / SPECIFICATIONS

Verified Product Identity and System Data

ManufacturerBently Nevada / Baker Hughes

Part Number / MPN330103-02-08-10-02-CN

Series3300 XL 8 mm

Product TypeMetric eddy-current proximity probe

ThreadM10 x 1

ArmorWithout armor

Unthreaded Length20 mm

Overall Case Length80 mm

Total Probe Length1.0 m

ConnectorMiniature ClickLoc coaxial

Cable TypeStandard 75 Ω cable

Probe Tip8.0 mm nominal diameter

Input / OutputPassive probe input to compatible Proximitor; conditioned voltage output is provided by the Proximitor Sensor

MeasurementStatic position and dynamic vibration

Compatible System3300 XL 8 mm probe, extension cable and Proximitor chain

Approval SuffixCN — verify the nameplate and project approval record

ConditionNew Original

WarrantyOne year

Shipping Origin32D Guomao Building , No.388 , Hubin south Road , Siming district , Xiamen , Fujian,China

Measurement Chain and Signal

The probe senses distance to a conductive target without contact. It must be connected through the correct 3300 XL extension cable to a compatible Proximitor Sensor, which supplies the conditioned voltage used by the monitoring channel. The probe and extension-cable lengths must add up to the Proximitor system length.

Mechanical Selection

The metric 330103 construction uses an M10 x 1 thread without armor. For this order code, confirm the 20 mm unthreaded length, 80 mm overall case length, 1.0 m integral cable and connector clearance against the original machine drawing and installed bracket.

Compatibility and Diagnostics

Confirm the complete probe, extension cable and Proximitor family before energizing the channel. Inspect connector condition, cable continuity and probe-tip integrity; then verify gap voltage, channel OK state and dynamic response. Do not mix a 5 m probe with a Proximitor configured for another system length.

Installation and Environment

Mount the probe at the documented gap and torque practice, preserve minimum cable bend radius and keep the coaxial path separated from high-energy wiring. Connector sealing, housing, conduit and hazardous-area suitability depend on the final installation and must be verified from site records and the product label.

Data control: The mechanical option fields and standard 3300 XL family compatibility are based on the manufacturer ordering information. The CN suffix, exact approval marking and unit-specific test scope must be verified from the supplied label and quotation before purchase.

03 / RECOMMEND

Procurement Decision Guide

System and Application

Suitable systems: 3300 XL 8 mm proximity-transducer chains using a metric M10 x 1 unarmored probe and the documented system length.

Common applications: Shaft radial vibration, axial position, Keyphasor reference, speed and machinery-protection measurements on turbines, compressors, pumps and other fluid-film bearing machines.

Package and Pre-order Check

Package: One 330103-02-08-10-02-CN proximity probe. Extension cable, Proximitor Sensor, mounting hardware and housing are included only when stated in the quotation.

Confirm before ordering: Complete suffix, M10 x 1 mounting, unthreaded and case lengths, 1.0 m cable, ClickLoc connector, system length, target material and required approvals.

Lifecycle and Replacement Risk

Confirm current production and physical-stock status at quotation. A probe with a similar tip can still differ in thread, case length, cable length, armor, connector or approval suffix. Replacement should be approved against the installed label, mechanical drawing and monitoring-channel configuration.

Matching Components

Select the corresponding 3300 XL extension cable and Proximitor Sensor so the total electrical system length is correct. Connector protectors, probe housings, brackets and monitor modules should be chosen from the installation drawing and site environmental requirements.

Bently Nevada Models

330103-12-16-10-02-05

Metric M10 x 1 probe, 120 mm unthreaded length, 160 mm case and 1.0 m cable.

330103-00-03-05-02-05

Metric unarmored probe with 30 mm case and 0.5 m standard cable.

330103-00-06-15-02-05

Metric unarmored probe with 60 mm case and 1.5 m standard cable.

330104-00-04-10-02-00

Armored metric M10 x 1 probe with 40 mm case and 1.0 m cable.

330104-00-08-15-02-00

Armored metric probe with 80 mm case and 1.5 m cable.

330130-075-01-00

3300 XL standard extension cable, 7.5 m, armored cable option.

330180-92-05

3300 XL Proximitor Sensor for a 9.0 m system without mounting hardware.

330190-045-01-05

Extended-temperature extension cable, 4.5 m, armored cable option.

Emerson EPRO Products

PR6422/010-010

PR6423/002-030

PR6423/010-010

PR6423/011-010

PR6424/000-030

PR6424/006-010

PR6424/010-010

PR6424/011-010

PR6425/010-010

PR6426/000-030

PR6426/010-010

PR6426/011-010

CON011

CON021

MMS 6110

MMS 6120

MMS 6210

MMS 6220

MMS 6312

A6110

04 / SERVICE & POLICY

Trust & Supply

STOCK VERIFIED: OCT 20, 2026

STOCK VERIFICATION

Stock verified: Oct 20, 2026

Availability is confirmed against the current quotation and physical-stock check.

PAYMENT TERM

Payment conditions and available methods are confirmed in the formal quotation before order placement.

LEAD TIME

Lead time is confirmed against current stock, requested inspection, testing and packing requirements.

DELIVERY WAYS

DHL / FedEx / UPS or an agreed air-freight service, according to destination and shipment requirements.

Disclaimer

Ewolomodule sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Ewolomodule is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.

Hot Tags :

Subject : Bently Nevada 330103-02-04-10-02-CN 3300 XL 8mm Proximity Probe

Submit

Bently Nevada 330103-02-04-10-02-CN 3300 XL 8mm Proximity Probe